Rapid Moisture Meter

Our range of rapid moisture meter are available in different technical parameters and specifications. These are completely designed in polished wooden carrying case with handle. Furthermore, our products are incorporated with the following specifications:

Sieve Shaker

Our range of sieve shakers available in different specifications and dimensions. These are incorporated with sieve table dies, which do not rotate but is inclined from the vertical axis and the direction of inclination changes progressively in clockwise direction. When the stop pin-below the table is removed, the shaker can have a rotary motion. In addition to this, our product also have a gyrator motion of the table in which there is an pair of rods and a holder. The holder can be fixed on the top of the upper cycles phase, A.C supply and available net weight is approximately of 77kgs.

Slump Test Apparatus

Our range of slump test apparatus are used for the determination of the consistency of freshly mixed concrete where the maximum size of the aggregate does not exceed 38mm. These consist of one slump cone with handles and foot pieces.

Standard Penetrometer

BIS : 1203, BIS : 310 (Part II). For testing a wide variety of materials such as grease, bitumen, tar wax, polish, food stuffs, rubber, asphalt and pharmaceutical creams. By applying a given force over a given period of time depression is made in the sample which may be measured in tenths of a millimeter and expressed as a penetration number.

Tensiometer

We manufacture and export the most treasured tensiometer. Our tensiometers calculate the soil moisture tension. It is an indirect way to determine the level of soil moisture. Scientific study of soils and irrigation scheduling are the areas where our tensiometers are widely used.

Vibration Machine.

BIS-4031.Vibration is mounted over coiled springs. Vibrations are by means of a revolving shaft with an eccentric. Frequency 12000±400 vibration per minute. Centre of gravity of the vibrator including the cube and mould is either at the centre of the eccentric shaft or within 25 mm below it. Easy assembling and dismantling of cube mould. Provided with belt guard and a time switch. Suitable for operation in 230 volts, 50 cycles single phase A.C. supply. Vibration machine is supplied complete with one cube mould..

Vibrating Table

BIS-2514.Proper compaction of cement concrete while casting specimens for compression testing is desirable to achieve a better and more consistent mixture. Vibrating table is ideally suited for this purpose. The table top is 500 mm x 500 mm and has stops along its edges to prevent moulds from sliding off the table during operation.

The maximum load capacity is 140 kg. The variable pitch pulley arrangement permits the frequency to be varied steplessly between 600 cycles / sec. and 430 cycles / sec. Suitable for operation 415 volts, 3 phase. 50 Hz. A.C. supply.